CM-PTE TWIN SCREW TYPE  RIGID PIPE MAKING MACHINE

TWIN SCREW RIGID PIPE MAKING MACHINE
"Continent" PTE-65 Counter-rotating, close-intermesh Twin screw Extruder can obtain better feeding and conveying result, especially for heat-sensitive powder extrusion (eg. PVC). Screw is specially designed and runs faster than general type PVC Twin Screw Extruder (20-50rpm). We are devoted to the research & development of machines with high quality, high output, and reliability to share with our customers.
Screw & Barrel are made of ACM2 high alloy steel (imported from Europe) service life is longer than general SACM645
Gear of gear Box is made of high alloy steel with special heat treatment and high grinding. All the gears and bearings are lubricated by oil lubrication system. This ensures the gear box will transmit high torque in a low noise level and with high machine reliability.
Cylinder uses oil cooling or water device to stabilize temperature differences.
Vacuum device removes moisture, gas and volatiles to ensure good quality.
Adopts PID Control System to get accurate temperature setting value.
Directly uses PVC powder to make pipes instead of using PVC pellets, reducing operation cost & saving space.

Item / Model SINGLE PIPE TWIN PIPE
CM-PTE65 CM-PTE95 CM-PTE95-C2
Screw Diameter mm 65 X 2 95 X 2 95 X 2
L/D of Screw - 18-24 18-24 18-24
Driving Motor HP 30 HPDC 75 HPDC 75 HPDC
Output kg/hr 60~80 150~480 150~480
Pipe Dia. inch 3/8"~ 6" 4"~10" 1 1/2"~3"
(Note : The output depends on the formulation of resin)
 

 

CM-RPP SINGLE SCREW TYPE RIGID PIPE MAKING MACHINE

 

 
RIGID PIPE MAKING MACHINE:
This line is design for pipe but fort different screw material, downstream equipment will be different.Designed for PVC, ABS, PP, PE rigid (soft) pipe.
Production used in building cooling or hot pipes.


Item / Model RPP-45 RPP-65 RPP-85 RPP-100 RPP-120 RPP-150
Screw Diameter mm 45 65 85 100 120 150
L/D of Screw - 24-26
Driving Motor HP 15 25 40 75 75 100
Output kg/hr 10~25 25~50 50~100 90~160 150~210 200~250
(Note : The output depends on the formulation of resin)